Strobe Horn With Sound And Light Fire Alarm
It is widely used in various organic waste gas purification systems with low concentration and large air volume. The exhaust gas to be treated can fully contact the activated carbon when it passes through the honeycomb activated carbon square holes, the adsorption efficiency can reach 67.16%, the wind resistance coefficient is small, and it has excellent adsorption, desorption performance and aerodynamic performance. The powdered activated carbon can be widely used in purification treatment. Contains organic gases such as toluene, xylene, benzene, benzene, phenols, lipids, alcohols and aldehydes, malodorous gases, and various gases containing trace metals. Environmental protection equipment using nut shell activated carbon has high waste gas treatment and purification efficiency, small adsorption bed size, low equipment energy consumption, and can reduce construction and operating costs. The purified gas fully meets the environmental protection emission requirements.
Food, chemical industry, industrial exhaust gas treatment, exhaust gas treatment of ventilation equipment used in public places such as airports, shipyards, electronic industries, automobile factories, pharmaceuticals, medical treatment, industrial buildings, large theaters and other public places. Honeycomb activated carbon is made of 50～70% activated carbon, 17～35% sepiolite and 13～25% kaolin using ceramic technology. That is, the three raw materials are weighed, ball milled, sieved, stirred, squeezed, smelted, stale, squeezed, squeezed, dried, calcined, inspected, packaged and stored. The activated carbon has water resistance, acid resistance, alkali resistance, and strong It has the advantages of high height and large specific surface area. It can be widely used in environmental protection, pharmaceutical, food and other industries and as a catalyst carrier.
Adopt the two-wire or the four-wire system wiring method and the main line end receives two main lines, no polarization; and connect the power end to DC24V power line.
1. At first , punch two holes in the installation place (on the wall ), the distance of the holes is 60MM, then put two plastic expansion plug into the two holes (if the wall is wooden material , it can be directly fixed with the self-tapping screws);
2. Connect to both DC24V power and network, and choose one kind of alarm sound according to requirement;
3. Use two self-taping screws to fix the alarm in the installation place, and then tighten the screws.
|Humidity Range||≤95% RH|
|Working Current||≤60 mA|
|Flash Intensity||≥1.2 WS|
|Flash Period||≤1.0 S|
|Alarm Sound||≥100 dB|
|Flash Light Lifespan||≥40000 TIME|
Hot Tags: strobe horn with sound and light fire alarm, China, manufacturers, suppliers, factory, companies, wholesale, buy, cheap